SOFT FOAM CUTTING BAND SAW

Band saw for foam material
- FOR SOFT FOAM CUTTING
- BUILD TO ORDER
- FULL SERVICE
Foto of  RB-VP 1400 - automatic vertical band saw (cutting and formatting)

RB-VP 1400 - automatic vertical band saw (cutting and formatting)

ID 1103
Custom made
on demand

Automatic vertical band saw RB VP 1400 for easy trimming, formatting and division of PUR blocks. In the longitudinal direction the cut is made by the feed of the material and in the transverse direction by the feed of the saw. The device enables cutting, formatting, cutting of a block of PUR material without demanding manipulation of the block during cutting.

Foto of  RB-VP 1400 - automatic vertical band saw (cutting and formatting)

RB-VP 1400 - automatic vertical band saw (cutting and formatting)

ID 1104
Custom made
on demand

The saw is designed exclusively for cutting flexible foam materials into bulk density 160kg / m3. Cuts from semi-finished products up to 2 sizes 000 x 2 200 mm (area) 1300 mm high depending on bulk density. The saw is equipped with a control system for precise positioning of the face and measuring the cutting position. Possibility of remote management and data export to USB.

Foto of RB 35 MP - small vertical PUR band saw (for small parts cutting)

RB 35 MP - small vertical PUR band saw (for small parts cutting)

ID 400
Custom made
on demand

Two-wheel, lightweight band saw with sliding desk especially suitable for cutting smaller parts of polyurethane foam and other. Saw RB 35MP based on the type of small saw to the textile cutting named RB 35 PP. High-precision band saw for small parts.

Foto of RB-V 600 - vertical band saw without sliding desk

RB-V 600 - vertical band saw without sliding desk

ID 397
Custom made
on demand

Basic model of RB 600 series. Triple wheel vertical band saw with stable desk.

Foto of RB-VP 600 - vertical band saw with sliding desk

RB-VP 600 - vertical band saw with sliding desk

ID 1036
Custom made
on demand

Triple wheel vertical band saw for soft foam cutting.

Foto of RB-VP 1100 - vertical band saw with sliding desk and two squares (luxury)

RB-VP 1100 - vertical band saw with sliding desk and two squares (luxury)

ID 396
Custom made
on demand

Four wheels vertical band saw with full equipment. Suitable for boards cutting and forming. The maximum cutting height to 1100 mm, distance from the square to blade 1150 mm and length of sliding desk (cut length) to 2200 mm. It is the most ideal solution.

Foto of RB-VP 1300 - vertical band saw for PUR

RB-VP 1300 - vertical band saw for PUR

ID 398
Custom made
on demand

Massive four-wheels band saw with variable cutting height up to 1300 mm suitable for formatting and common cutting PUR. From economic to luxury version, according to customer's request.

Foto of PRS 4 - repassed, modification vertical band saw

PRS 4 - repassed, modification vertical band saw

ID 415
Custom made
on demand

PRS 4 modification for cutting froth, foam material in vertical, upright plains.

Foto of RB-HP SPEC. - special horizontal band saw with vertical sliding

RB-HP SPEC. - special horizontal band saw with vertical sliding

ID 411
Custom made
on demand

Special horizontal two wheel cutting machine (band saw) with vertical sliding. This sliding is fit for setting the cutting off height. Saw RB - HP can be fitted with serrated knife, normal knife, convex and concave knife etc.

Foto of RB–HX 300 - horizontal manually movable bandsaw for PUR

RB–HX 300 - horizontal manually movable bandsaw for PUR

ID 407
Custom made
on demand

This special bandsaw allows for the sawing of the above-mentioned materials into various layer thicknesses. The slabs with max. proportions 2100 x 1200 x 300 mm are put onto a stable table with manual lifting. Shift into the cut are manually too. Good saw for recycled foam cut with a serrated knife.

Foto of RB-HX 1100 - horizontal bandsaw for PUR

RB-HX 1100 - horizontal bandsaw for PUR

ID 408
Custom made
on demand

This machine is fit for saw into thin sheets blocks and slabs (from 0 to 1100 mm thick) made from the soft foam materials. The slabs with max. proportions 2100 x 1100 x 1100 mm are put onto a stable table with hydraulic lifting. Shift into the cut are manually by the linear guide. Good saw for recycled foam cut with a serrated knife.

Foto of RB-VP 600/G - special vertical band saw for graphite blocks cutting

RB-VP 600/G - special vertical band saw for graphite blocks cutting

ID 994
Custom made
on demand

Specially, custom maded band saw for exact cutting from graphite blocks.

Didn't find what you were looking for? Do you need advice? Contact directly:

© copyright 2006-2024 ROBEX DK, s.r.o.® , change restricted …
webdesign ROBEX DK, s.r.o.
Website of ROBEX DK, s.r.o. use cookies. We use this file and information to analyze information about our visitors, to improve our website, to display personalized content and to provide you with a great web experience. More info here!

DETAILED SETTINGS
:: InstalaceZTI.cz ::