Other machinery, custom made special machines

This machine is identified especially to dividing hard synthetic ropes, rope and sling.

This machine is identified especially to dividing hard synthetic ropes, rope and sling.

This machine be instrumental towards accurate dividing intake from plastic (PP, PE) part by the help of guidance robot.

This machine be instrumental towards accurate dividing intake from plastic (PP, PE) part

This machine is identified especially to dividing synthetic ropes, rope and sling. Act about bedside table to stationary fusing heat cutter HSG 00 (to both types).

The rubber cuff welder is a single-purpose device intended for welding rubber cuffs, according to predefined and user-changeable (USB import/export) recipes. The Siemens control system with a Siemens touch screen and Festo pneumatic elements enable the connection of remote management and connection to the company-wide infrastructure.

The divider is intended for dividing tape according to pre-defined and user-changeable (USB import/export) recipes. An oval section and a pair of holes for the belt clip are created in the belt, and then a defined number of holes with a set spacing are placed in position. The end of the tape is finished with a straight cut or a cut to a point. The Kinco control system with a 7-inch touch screen allows remote management connection.

Trolley for transport and handling of large-roll rolls up to a diameter of 800 mm and a total weight of 1000 kg. The trolley significantly facilitates the transport and attachment of the roll to the quick-release clamps (snap-in bearings) on the machine. With integrated hydraulic lift and brake.

The ASP-1J is designed to precut the upper self-adhesive layer of material on a paper carrier. The paper carrier must remain in its entirety so that it can be rewound. Length of cut material adjustable in the range of 5 - 400 mm. The machine is fully automatic and equipped with a servomotor, frequency converters and Omron control.

Fully automatic machine for folding medical material in a roll from a width of 370 mm (up to 600 mm) into final packages with dimensions of 65 x 76 mm (up to 90 x 110 mm) with a cycle of up over 1.5 pieces in 1 s. The machine is equipped with a Siemens control system.

The NoName machine is designed for cutting, cutting especially Velcro. this machine was brought to us as partially non-functional (accuracy + - 3 mm, low speed). An analysis was performed and then we installed the machine with a fast PLC with a touch screen. By adjusting the settings of the frequency converter together with the new control system, an accuracy of + - 0.1 mm was achieved with increasing speed (0.6 s / 1 piece 50 mm long).

Specially mature pneumatic operated machine for sealing filter materials by fusing wire.