Accessories for production plants & machines (measure)

Digital counter appropriate for numeration spanning strata matters with switch.

Possibility nether world digit. Automatic numeration loading when arrive with cutting machine.

Serve for numeration piece at assembling to the box or transportation. Possibility nether world digit. Setting statement piece, automatic numeration loading. Possibility acoustic signalling.

The measuring wheel OK - III is used for measuring the lengths of flat or strip materials. The circumference of this wheel is 200 mm and it is always coated with white rubber. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T.

ype OKIII - 200M can be used as a specified gauge after CMI verification. The measuring wheel OK - III M is used for measuring the lengths of flat or strip materials. The circumference of this wheel is 200 mm and it is always coated with white rubber. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T. When used with the LUCA-T (M) unit, it is possible to perform metrological verification and then use the assembly for customer measurements.

The measuring wheel OK - III is a device for measuring the lengths of flat or strip materials. The circumference of this wheel is 400 mm. The wheel can be with a white rubber cover or without a stainless steel cover with radling in the case of the OC type. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T.

Type OKIII - 400M can be used as a specified measuring device after CMI verification. The measuring wheel OK - III M is used for measuring the lengths of flat or strip materials. The circumference of this wheel is 400 mm. The wheel can be with a white rubber cover or without a stainless steel cover with radling in the case of the OC type. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T. When used with the LUCA-T (M) unit, it is possible to perform metrological verification and then use the assembly for customer measurements.

New electronic counter LUCA-T with touch display is destined to count the impulses coming from the non-contact or contact sensors. It can distinguish the direction (attribution, subtraction). Read values are counted in two independent units and you can swich displaying of these on the counter display. One of the unit can be set by program for example as the velocity meter.

New electronic counter LUCA-T with touch display is destined to count the impulses coming from the non-contact or contact sensors. It can distinguish the direction (attribution, subtraction). Read values are counted in two independent units and you can swich displaying of these on the counter display. One of the unit can be set by program for example as the velocity meter.

This small power source with output voltage 12 V DC is fit for counters ROB. Adapter has cable 1,5m long with conector. Output power about 24W is more then good for work with our counters, scalers. Power source ROB has sufficient power for other inputs power (switches, optical sensor etc.) or some outputs as relays etc.

DC power plug 5.5 mm / 2.5 mm. Socket with pin Ø 2.5 mm and assembly into the hole (on the panel) in axial design of the center pin. Metal high quality connector.

Signal DIN 5 plug for quick connection between incremental measure wheel (encoder) and incremental counters ROB. Metal high quality connector.