(AUTOMATIZATION COMPONENTS, MEASURES, COUNTERS, ENCODERS)
Rotary incremental hall encoder Heidelberg with pulse output 400 ppr. ABZ
The high-quality Heidelberg incremental rotary encoder (made in the Czech Republic) with ABZ pulse output is designed for bidirectional counting of distance traveled or revolutions. Powered by DC 12 - 24 V with a 6 mm shaft and a 1 m cable. Type AMI G ZQH with a resolution of 400 ppr. (a total of 400 impulses per revolution). We use this encoder on machines manufactured by us as well as measuring assemblies and separate ROB K400 wheels.
Highly accurate and reliable electromagnetic (Hall) encoders of the AMI series from the renowned manufacturer Heidelberg.
Output B is shifted by 1/2 pulse A (1/4T = 90°). The Z output is interpreted 1 x per rotation (e.g. for the Origin function or for sensing the rotation speed).
The PPR value is given as the sum of all pulses per 1 rotation of the encoder, i.e. A and B channels, leading and falling edges.
Encoder packaging in a paper box with Mirelon EPE liners.
ABZ outputs can be operated on PNP systems (for NPN, the signal must be converted using embedded resistors).
Type: rotary encoder
Type: incremental (addition/subtraction)
Sensor: electromagnetic (hall)
Output: voltage, ABZ
signals
Resolution: 400 ppr. (pulses per 1 turn)
Out: PNP transistor
Case: diameter 35.5mm, shaft diameter 6mm, length 15mm
Housing material: white ABS plastic
Main part material: aluminum
Shaft material: stainless steel
Supply voltage: 12-24V DC
Max. (limit) output frequency: ≥180kHz
Total prop. delay: ≤92µS
Limit time of starting and setup edges: >10V/1µS (cable length 500 mm and impedance 5kΩ)
Current consumption: max. 150mA
Insulation resistance: min. 100MΩ (at 500V DC)
Dielectric resistance: 500V DC for 1 min.
Max. mechanical speed: 5000 rpm
Degree of protection: IP50 (EN60 529)
Operating temperature: -15°C (without ice) to 70°C (humidity 35-85%)
Max. shaft load: 20N radial, 30N in tension
Vibration resistance: 10-500Hz, ≤100m/s² (EN60 068-2-6)
Shock resistance: 6ms, ≤300m/s² (EN60 068-2-27)
Moment of inertia: ≤0.5 x 10(-6)kgm²
Initial torque: ≤0.1 Nm max. (at 20°C)
Connection: cable 1m (8C)
Connection: brown +DC, blue 0V, white - channel A, green - channel B, yellow - Z pulse
Each encoder has a test sheet from the output inspection
For products that are in stock, it is possible to arrange testing, testing by us (the material will be sent by transport service), or you can order the goods by agreement try directly with us.
